Top rated valves manufacturer and supplier: Flow control valves are used to regulate the flow volume of passing fluid in hydraulic systems. It prevents excessive flow by limiting flow to a preselected maximum rate, regardless of changing line pressure. It is a hydraulically operated, pilot controlled, diaphragm valve. The pilot control responds to the differential pressure produced across an orifice plate installed downstream of the valve. Accurate control is assured as very small changes in the controlling differential pressure produce immediate corrective action of the main valve. Flow rate adjustments are made by turning an adjusting screw on the pilot control. SHSUOTE is the top flow conrtrol valve manufacturer in China, hydraulic flow valves provide precision flow control in 1 direction, and automatically allow unrestricted free flow in opposite direction. The valve includes an orifice plate with a holder that should be installed one to five pipe diameters downstream of the Valve. As a flow control valve supplier, we provide several orifice plate with different hole optional for each size, see the additional table for selection of orifice to guarantee accurate control of flow rate. Contact us for more details! Find extra information on industrial valve manufacturer.

Pressure reducing valve is a hydraulically operated, diaphragm actuated control valve. It designed to withstand even the toughest environments. The Valve automatically reduces a higher inlet pressure to a steady lower downstream pressure, regardless of changing flow rate and/or varying inlet pressure. As the leading pressure reducing valve manufacturer, all of our water pressure reduce valve is an accurate, pilot-operated regulator capable of holding downstream pressure to a re-determined limit. When downstream pressure exceeds the pressure setting of the control pilot, the main valve and pilot valve close drip-tight. We are pressure reducing valve supplier with over 18 years experience, our pressure regulating valve has an internal port throttling plug that provides an accurate and stable response for flow and pressure regulation while simultaneously reducing noise and vibration.

Industrial Processes: Many industrial processes require precise control over liquid levels to maintain efficiency and safety. Altitude valves can be found in various industries such as manufacturing, food processing, and chemical plants, where they regulate liquid levels for optimal operation. Sewage Treatment Plants: Altitude valves are also used in sewage treatment plants to manage the level of wastewater within specific compartments or tanks. By preventing overflows or emptying too quickly, these valves contribute to effective treatment processes. Plumbing Systems: In buildings with multiple floors or complex plumbing setups, altitude valves are installed to balance the pressure between different sections of the system while ensuring consistent supply throughout.

NSCV- Non Slam Check Valve is used as protection against reverse flow when power failure in areas where noise pollution or water hammering is a critical issue. It can provide not only quiet performance but also low head loss. Features: High strength ductile iron body used for durability and less weight; Advanced dynamic design of single body with diffuser provides streamline flow and assures lower head loss; One of the lowest head loss check valve, big save in pumping power cost, valve disc with shorter stroker and spring reverse faster than most of check valve; Coated with powder epoxy both inside & outside for corrosion resistance; Bronze bushing reduce wearing problem during operation; Hydrodynamic design with spring ensures non slamming and water hammerless; Stainless steel spring hidden in the diffuser under protection while valve in operation; Disc will positively close before reverse flow, and maximize the closing speed up to 0.2 Sec; Installation can be vertical/horizontal/ inclined. For size DN800 and up preferred vertical installation. ·Comply with EN 558-1, ISO 5752 and EN 1092-2, ISO 7005-2 flange dimension. Find additional details on https://www.shsuotevalve.com/.

What is an Altitude Valve? An altitude valve, also known as an altitude control valve or altitude regulator, is a type of valve used in water distribution systems. It is designed to maintain a specific water level or pressure within a storage tank or elevated structure. The purpose of an altitude valve is to control the flow of water into or out of a storage tank to maintain a predetermined level or pressure. It functions by automatically opening and closing based on changes in water level or pressure. When the water level or pressure drops below the desired set point, the altitude valve opens to allow water to flow into the tank, replenishing the supply. Conversely, when the water level or pressure rises above the set point, the valve closes to prevent overfilling or excessive pressure.

The valve is made of DI body and DI disc; Advanced newly design with dovetail seal design and captured by epoxy on the back, with multiple raised ring to have more contact with disc but less friction during closure; The double eccentric design provides less contact area of seal with disc, and less stress at the open position of the disc; The disc design with arch shape and thru disc can provide better flow capacity, stronger and less weight . The shaft and disc connection with tangential pin which can be exchangeable and provide rigid connection; The DN 100-500MM use flat disc, and DN 600-1200MM use arch shape disc; Epoxy coated interior and exterior; Valve design meets or exceeds EN 593; Top flange connection meets ISO 5211-1982, and F/F meets EN 558-1 series 13 & 14.