Double planer machine supplier in China: The defining characteristic of all machine presses is that they press a work-piece using high pressure to change its shape. While the exact mechanics vary depending on the type of machine press, most machine presses work by pressing a plate or die onto or against a work-piece. The work-piece can either be manually placed into the machine or a through-feed will automatically place the work-piece in the correct position. Once in position, using hydraulics pressure, the machine press pushes the plate or die against the surface of the work-piece, which causes the work-piece’s shape to deform into the shape required by the manufacturer. See more details on double surface planer.

A beam saw cuts panels and sheet materials to the size required. It can deal with MDF, insulation, plastics and laminated boards. A clamping beam keeps the boards in place while the mobile saw carriage moves underneath the material. This type of saw has a computer control allowing you to automate as well as making multiple cuts. These machines can also be linked to computer software that optimises your yield. A beam saw is designed for repetitive, accurate cutting to size, making them the most cost-effective at precision panel cutting. Front loading beam saw – the user loads the materials into the front of the machine. Rear loading beam saw – the user places the materials on to an automatic lift table which will automatically be loaded into the back of the beam saw.

Up-acting machines typically apply hydraulic pressure from the centre of the lower beam which pushes the lower beam upwards into a fixed upper beam. Tonnage is applied to the centre of the lower beam in an upward fashion. The flex in the bend tends to be even from left to right. Hydraulics are used to push the lower beam up and gravity is used to return the lower beam down. A loss in power will result in the brake being in the open position. Since the lower beam does move during operation, feedback to the operator is given. Knowing the lower beam is moving can be a safety feature. Down-acting machines are preferred if staged bending is important. Staged bending is a valuable option that can significantly improve productivity while minimising setup time.

The jig saw, which is also known as a scroll saw, is used for making intricate and irregular cuts on small jobs. On thin wooden pieces, jig saw can cut in a curvilinear path. These woodworking machines are actually a type of band saw of much smaller size and specially adapted to irregular work. It consists of a base, frame, table, upper and lower chucks, guide assembly, and blade. Chucks hold the blade with its teeth pointing downward. The blade resembles a hand hacksaw blade in regard to its shape. The blade reciprocates vertically up and down and shapes the wood. The table of the jig saw can be tilted for angular work. The special feature of the saw is that it can be used to cut inside curves. A jig saw is specified by its blade-to-arm distance.

Probably the second most important of single woodworking machines in a carpentry shop is the circular saw. It can be used for ripping, cross cutting, mitering, beveling, rabbeting, and grooving. Although there are many types of circular saws such as universal saw, variety saw, bench saw, the basic working parts are common to all. Each has a flat surface or table upon which the work rests while being cut, a circular cutting blade, cut-off guide, and a ripping fence that acts as a guide while sawing along the grains of the wood. The circular saw usually has provisions for tilting the table upto an angle of 45° to enable the machine to cut at different angles required during mitering, levelling, etc. The size of a circular saw is determined by the diameter of the saw blade.

There are lots of different types of compressors on the market. You need to consider portability and output when buying. You’ll want a light compressor if you’ve got to move it between workshops on a daily basis, and the output has to meet the requirements of the machinery that will be using it. Boring machines are used to bore holes or recesses in wood. This can be used for wooden pegs which hold mortise and tenon joints together. Lathes produce chair legs, bowls and balusters. Work-pieces are suspended over a metal bed, spun at high speed, and shaped using special chisels and gouges. See extra info on https://www.v-holdmachinery.com/.

Founded in 1996, V-HOLD have more than 20 years of professional four-sided plane production, to create China’s four-sided plane first brand and commits itself to provide the most secure, reliable, efficient, energy-saving, economical production equipment for the customers around the world. Nowadays, most of the products including 4-Side Moulder, Multiple Rip Saw, Multiple Rip Saw with Double Side Planner, and Automotive Floor Production Line have passed ISO9001: 2000 quality system.